From the Wires
Almadex Hits 153.50 Meters of 0.68 g/t Gold and 0.27% Copper Including 84.00 Meters of 0.96 g/t Gold and 0.37% Copper in Hole EC-17-021 at the Norte Zone, Identifies New Zone of Mineralised Outcrop in the Encinal Zone
By: Marketwired .
Jun. 19, 2017 04:05 PM
VANCOUVER, BC--(Marketwired - June 19, 2017) - Almadex Minerals Limited ("Almadex" or the "Company") (TSX VENTURE: AMZ) (OTCQB: AXDDF) is pleased to announce it has received assay results from holes EC-17-021 and EC-17-022 of the 2017 Norte Zone drilling program. EC-17-021 was drilled at an azimuth of 000 from a new pad, located about 285 meters to the south from pad EC-16-010. Hole EC-17-022 was drilled from the same pad as hole EC-16-020 but to the north at an azimuth of 000 degrees. Hole EC-17-021 intersected significant mineralisation starting at a depth of 93 meters. Hole EC-17-022 helps define the mineralised zone along strike and provides a significant stepout from the previous hole drilled from this collar, EC-17-020. Highlights from holes EC-17-021 and 22 include the following intercepts which are also shown on the attached plan and sections:
Hole EC-17-021 NORTE ZONE, 000 Az, -60 dip From 93.00 to 246.50, 153.50 meters @ 0.68 g/t gold and 0.27% copper Including 95.50 to 179.50, 84.00 meters @ 0.96 g/t gold and 0.37% copper From 273.00 to 440.00, 167.00 meters @ 0.27 g/t gold and 0.12% copper Including 337.00 to 401.00, 64.00 meters @ 0.50 g/t gold and 0.21% copper Hole EC-17-022 NORTE ZONE, 000 Az, -40 dip From 120.91 to 376.55, 255.64 meters @ 0.26 g/t gold and 0.17% copper Including 129.91 to 188.55, 58.64 meters @ 0.38 g/t gold and 0.23% copper And 200.55 to 346.55, 146.00 meters @ 0.27 g/t gold and 0.18% copper And 262.55 to 294.55, 32.00 meters @ 0.43 g/t gold and 0.24% copper
Almadex is also pleased to announce that a new area of exposed stockwork quartz veining and gold mineralisation in the Encinal Zone of the project has been identified. The Encinal Zone is located roughly 3.5 kilometres to the south-southeast of the Norte Zone drilling and 2.5 kilometers southeast of the recently identified Raya Tembrillo Zone of stockwork veining. Almadex has collared a hole which is currently being drilled to test this new area of veining in the Encinal Zone.
J. Duane Poliquin, Chairman of Almadex commented, "We are carrying out a systematic drill campaign to follow-up these results in the Norte Zone. Elsewhere on the project we are conducting mapping and sampling preparatory to drilling other zones. This work already has defined previously unknown mineralization in the Villa Rica Zone and now an area of stockwork veining cropping out in the Encinal Zone. We look forward to reporting further results in the coming weeks and months as the programs progress."
Work is underway to provide access at the newly discovered Raya Tembrillo target, located in the Villa Rica Zone, roughly two kilometres to the south of the Norte Zone.
About the El Cobre Project
The El Cobre Project has a total area of 7,456 hectares and is located adjacent to the Gulf of Mexico, about 75 kilometres northwest of the major port city of Veracruz, Mexico and has uniquely excellent infrastructure. The project area is situated 200 meters above sea level with extensive road access and is located less than 10 kilometers from a power plant, highway, gas line and other major infrastructure. Major power lines cross the property area. Almadex has its full drill permits from SEMARNAT and has land access agreements in place. The land ownership is private over most of the project area, has previously been cleared and is used for local agricultural purposes.
The four copper-gold porphyry targets currently known within the El Cobre Project, Encinal, El Porvenir, Norte and Villa Rica are defined by distinct Cu-Au soil anomalies, discrete, positive magnetic features and a large IP chargeability anomaly. The largest target area is the Villa Rica zone which has not been drill tested. Limited past RC and diamond drill testing at Encinal, El Porvenir, and Norte has returned wide intercepts of porphyry copper-gold and narrow zones of intermediate sulphidation epithermal gold-silver vein mineralization, with selected intercepts as follows:
El Porvenir Zone: Drilling has demonstrated that the system persists at least to 400 m depth. Significant copper and gold grades were intersected such as 0.16% Cu and 0.39 g/t Au over 290 m in hole DDH04CB1. In addition, hole EC-13-004 intersected 0.23% Cu and 0.36 g/t Au over 106 m, to a depth of 504 m, again indicating potentially significant mineralization at depth. Deep IP Zone: To the north of the El Porvenir Zone a large area of high chargeability responses located at depth. This zone is interpreted to be a possible core to the entire El Cobre porphyry system. Encinal Zone: Hole CB5 intersected a highly altered breccia pipe containing fragments of stockwork veining and porphyry mineralisation across which 18.28 meters returned 1.42 g/t Au and 0.10% Cu. The breccia pipe occurs in a large alteration zone, IP chargeability high and magnetics low which has not been tested to depth. On July 1, 2016, Almadex reported results of drilling at Encinal, which were consistent with the interpretation that the drilling was located in a zone marginal to a potential copper-rich portion of the porphyry system. Norte Zone: All five holes drilled in the Norte Zone prior to 2016 intersected porphyry-style mineralization. Hole 08-CBCN-022, one of the deepest holes drilled at Norte in 2008, returned values of 0.14% Cu with 0.19 g/t Au over 259 m and 08-CBCN-19 intersected 41.15 meters averaging 0.42 g/t gold and 0.27% copper to the end of the hole at 187.45 meters. Drilling in 2016 and 2017 has been designed to test this zone to the south and at depth.
In addition to the above, several anomalous areas remain untested by drilling, including the Villa Rica Zone, a roughly 2.5 kilometre by 1 kilometre area defined by a strong north-northwest trending magnetic-chargeability high and associated copper-gold soil geochemical anomaly. Recently (see Almadex news releases of March 19
More information on El Cobre is available on the Almadex website at http://www.almadexminerals.com/ASSETS/PROJECTS/Cobre.html.
Larry Segerstrom, M.Sc. (Geology), P.Geo., A Director of the Company, is a Qualified Person as defined by National Instrument 43-101 ("NI 43-101") and has reviewed and approved the contents of this news release. The porphyry mineralisation reported in this news release is associated with broad areas of alteration and stockwork veining. True widths cannot be determined at this time. The analyses reported were carried out at ALS Chemex Laboratories of North Vancouver using industry standard analytical techniques. For gold, samples are first analysed by fire assay and atomic absorption spectroscopy ("AAS"). Samples that return values greater than 10 g/t gold using this technique are then re-analysed by fire assay but with a gravimetric finish. Blanks, field duplicates and certified standards were inserted into the sample stream as part of Almadex's quality assurance and control program which complies with National Instrument 43-101 requirements. A technical report on the El Cobre project prepared in accordance with National Instrument 43-101 and entitled "Technical Report on the El Cobre Property", was filed in May 2015 and can be obtained from www.sedar.com.
Almadex Minerals Limited is an exploration company that holds a large mineral portfolio consisting of projects and NSR royalties in Canada, the U.S., and Mexico. This portfolio is the direct result of over 35 years of prospecting and deal-making by Almadex's predecessor company, Almaden Minerals Ltd. Almadex is currently focused on exploration at its El Cobre gold/copper porphyry project in Veracruz, Mexico, in which it holds a 100% interest, subject to a sliding-scale net smelter returns royalty ("NSR") equivalent to 0.5% in the event that production from the property exceeds 10,001 tonnes per day of ore. This NSR can be reduced to 0.25% at this production rate through the payment of US$3.0 million.
On behalf of the Board of Directors,
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.
This news release includes forward-looking statements that are subject to risks and uncertainties. All statements within it, other than statements of historical fact, are to be considered forward looking. Although the Company believes the expectations expressed in such forward-looking statements are based on reasonable assumptions, such statements are not guarantees of future performance and actual results or developments may differ materially from those in forward-looking statements. Factors that could cause actual results to differ materially from those in forward-looking statements include market prices, exploitation and exploration successes, continued availability of capital and financing, and general economic, market or business conditions. There can be no assurances that such statements will prove accurate and, therefore, readers are advised to rely on their own evaluation of such uncertainties. We do not assume any obligation to update any forward-looking statements, other than as required pursuant to applicable securities laws.
Image Available: http://www.marketwire.com/library/MwGo/2017/6/19/11G141377/Images/ElCobre_Targets_Holes_021_022-c6f8083ce82aa121911286b45d94faba.jpg
Latest AJAXWorld RIA Stories
Subscribe to the World's Most Powerful Newsletters
Subscribe to Our Rss Feeds & Get Your SYS-CON News Live!
SYS-CON Featured Whitepapers
Most Read This Week